Bearing ManufacturerSize 10*26*11mm NSK 51200 Thrust Ball Bearing
29/05/2023Bearing New Technology Professional Manufacturing NSK UC309 Pillow Block Bearing
25/05/2023
Product introduction:
Rod end joint bearing is a joint bearing with a rod end or mounted on the rod end, it belongs to a class of joint bearing.
Rod-end joint bearings are mainly composed of an inner ring with an outer sphere and an outer ring with an inner sphere, which can bear large loads.
Classification:
(1) SI... Type E is GE... E-bearing and rod end assembly. Rod end with internal thread, the material is carbon structural steel; No lubricating tank. It can bear radial load and axial load less than or equal to 0.2 times radial load in any direction.
(2) SA... Type E is GE... E-bearing and rod end assembly. Rod end with external thread, the material is carbon structural steel; No lubricating oil groove, can bear radial load and any direction less than or equal to 0.2 times radial load axial load.
(3) SI... Type ES is GE... Type ES bearing and rod end assembly. Rod end with internal thread, the material is carbon structural steel; Lubricated oil groove. It can bear radial load and axial load less than or equal to 0.2 times radial load in any direction.
(4) SA... Type ES is GE... Type ES bearing and rod end assembly. Rod end with external thread, the material is carbon structural steel; Lubricated oil groove. It can bear radial load and axial load less than or equal to 0.2 times radial load in any direction.
(5) SIB... S-shaped rod end with internal thread, the material is carbon structural steel; The inner ring is hardened bearing steel; Lubricated oil groove. It can bear radial load and axial load less than or equal to 0.2 times radial load in any direction.
(6) SAB... S-shaped rod end with external thread, the material is carbon structural steel; The inner ring is hardened bearing steel; Lubricated oil groove. It can bear radial load and axial load less than or equal to 0.2 times radial load in any direction.
(7) SQ... Type I is spherical rod end joint bearing, rod end is carbon structural steel; The ball head is carburized steel. Can withstand radial load and small axial load in any direction.
Characteristics：
According to the different types and structures of rod end joint bearings, they can bear radial load, axial load or radial and axial combined load. Rod-end joint bearings are generally used for swing motion with low speed and can also be used for inclined motion within a certain range of angles. According to its different types and structures, it can bear radial load, axial load or radial and axial load.
Application：
SA30T/K bearing can be used in extremely harsh environment and special working conditions, can be widely used in aviation, aerospace, navigation, petroleum, chemical industry, automobile, electronic equipment, metallurgy, electric power, textile, pump, medical instruments, scientific research and national defense and military fields.
