FAG Bearings For Industry F-578216.SKL-H95A Tapered Roller Bearing

Tapered roller bearings are separated bearings, and the inner and outer rings of the bearings have tapered raceways. This kind of bearing is divided into single row, double row and four row tapered roller bearings and other different structural types according to the number of rows of rollers installed.
Single row tapered roller bearings can bear radial loads and single direction axial loads. When the bearing bears radial load, an axial component will be generated, so it needs another bearing that can bear the axial force in the opposite direction to balance it.
A single row tapered roller bearing has an outer ring, an inner ring and an inner ring assembly consisting of a set of tapered rollers enclosed by a basket cage.
The conical Angle of the outer ring raceway of a single row tapered roller bearing is between 10° and 19°, which can withstand the combined action of axial load and radial load at the same time. The larger the cone Angle, the greater the ability to bear axial load. Bearings with large tapered angles, rear code plus B, cone Angle between 25°~29°, it can bear large axial load. In addition, single-row tapered roller bearings can be adjusted during installation.

If this kind of bearing is used improperly, are there any precautions?

(1) Keep tapered roller bearings and their surroundings clean.
Even small dust that can't be seen by the eye will bring bad effects to the bearing. Therefore, keep the surrounding clean, so that the dust will not invade the bearing. (2) Use with care and caution.
Strong impact on tapered roller bearings in use will produce scars and indentations, which will become the cause of accidents. In serious cases, there will be cracks, fracture, so must pay attention to.
(3) Use the appropriate operating tools.
Avoid replacing existing tools with the right ones.
(4) Pay attention to the corrosion of tapered roller bearings.
When operating bearings, sweat on the hands will become the cause of rust. Be careful to use clean hands, preferably wear gloves as much as possible.