It consists of an outer ring, an inner ring, a set of steel balls and a set of cages.
It mainly bears pure radial loads, but also can bear joint loads. When it is subjected to pure radial load, its contact Angle is zero. When it has a larger radial game, that is, it has angular contact bearing performance, which can withstand a larger axial load.
Deep groove ball bearing has small friction coefficient and high limit speed, so it has more advantages than thrust bearing when axial load is rotating at high speed. But because its aligning performance is limited, the concentricity of bearing installation should be high, otherwise it will affect the balance of its operation, increase the bearing stress, and thus shorten the working life.
Bearing Characteristics：
Deep groove ball bearing simple structure, compared with other easy to achieve high precision, so can be mass production. In addition to the conventional models, it also has a variety of structural variations, such as deep groove ball bearing with dust cover, deep groove ball bearing with rubber ring and deep groove ball bearing with a stop groove and so on.
Rubber Sealed Bearings：
The sealing cover of deep groove ball bearing is mainly used to prevent the intrusion of external foreign bodies (solid foreign bodies, liquid foreign bodies) and prevent the loss of bearing lubricant. There are two sealing forms of bearing seal cover:
1. Non-contact sealing cover (sealing cover and inner ring are not in contact), including stamped steel seal cover (iron seal) and non-contact rubber seal cover.
Advantages: dust proof, relatively high speed, metal seal cover relatively low mute effect, relatively low price.
Disadvantages: There is no protection against liquid foreign bodies.
2. Contact sealing cover (sealing cover and bearing inner ring with a single lip or more lip contact), including contact rubber sealing cover and labyrinth type contact sealing cover.
Advantages: dust proof, liquid foreign body prevention, high mute effect.
Disadvantages: slightly lower speed, slightly higher price.
Therefore, there is no difference between good and bad deep groove ball bearing sealing cover, only the difference between suitable. For example: in a clean environment, it is unnecessary to use contact rubber sealing cover, which will only increase the additional cost of the manufacturer.
To sum up, the sealing type of deep groove ball bearing is not good or bad. The main consideration is where the bearing is used and the environmental factors of the bearing need to be considered. The structure of the sealing ring is different, the material is different, and the friction coefficient is different.
Application：
6207-2RS bearing is used for grain processing equipment, feed processing equipment, drainage and irrigation machinery, soil tillage machinery, planting machinery, plant protection machinery, fertilization machinery, agricultural machinery accessories, other agricultural machinery, field operation machinery and so on.
