Characteristics And Advantages Of Self-lubricating Bearings
04/07/2024There Are Several Things To Pay Attention To When Installing And Replacing IKO Thrust Ball Bearings
08/07/2024
- Oil-free lubrication or low-oil lubrication is suitable for places where refueling is impossible or difficult, and can be used without maintenance or with little maintenance.
- Good wear resistance, low friction coefficient and long service life. 3. With appropriate elasticity and plasticity, stress can be distributed on a wider contact surface, improving the load-bearing capacity of FAG bearings.
- The static and dynamic friction coefficients are similar, which can eliminate creeping at low speeds, thereby ensuring the working accuracy of the machinery.
- It can reduce vibration, reduce noise, prevent pollution and improve working conditions.
- During operation, a transfer film can be formed to protect the grinding shaft without biting the shaft.
- The hardness requirements for the grinding shaft are low, and shafts that have not been quenched and tempered can be used, thereby reducing the processing difficulty of related parts.
- Thin-walled structure and light weight can reduce the size of the machine.
- The back of the steel can be electroplated with a variety of metals and can be used in corrosive media; it has been widely used in the sliding parts of various machines, such as printing machines, textile machines, tobacco machinery, micromotors, automobiles, motorcycles and agricultural and forestry machinery, etc.
Introduction to the boundary lubrication self-lubricating FAG bearing series
- Good load bearing and good wear resistance.
- Suitable for rotational motion and swinging motion under high load and low speed, and occasions where frequent opening and closing under load make it difficult to form fluid dynamic lubrication.
- Under boundary lubrication conditions, it can be maintained without oiling for a long time, and oiling in the transition layer can make the FAG bearing have a longer service life.
- A certain margin can be left when the surface plastic layer is processed and formed, and it can be processed by itself after assembly and pressing into the seat hole to achieve a better assembly size.
- The products are mainly used in automobile chassis, metallurgical machinery, mining machinery, water conservancy machinery, construction machinery, agricultural machinery, rolling equipment, etc.
