What does 23024C/W33 and 23024CA/W33 bearing represent?

A:23023024C/W33 and 23024CA/W33 should be the models of SKF bearings. In 23024, 2 is the self-alcing roller bearing, 3 represents the width, 0 is the diameter code, 24 is the inner diameter of 120mm, C and CA are copper alloy cages, /W33 represents the use of temperature limit below 200 degrees.

Q2:5202ZZC3 bearing, what standard is it?

A:Angular contact ball bearing ZZ stands for double-sided iron seal, C3 stands for large clearance. The new domestic model is 3202-2Z inner diameter 15mm outer diameter 35mm width 15.9mm.

Q3:What are the SKF bearing models?

A:SNL bearing housing SONL bearing housing SDG bearing housing SAF bearing housing SDAF bearing housing

SBD bearing housing TVN bearing housing TN bearing housing THD inflating wheel bearing housing

Flange type bearing seat I-1200 flange type bearing seat 7225

Q4:Bearing SKF NJ2220ECF model significance, and NJ2220ECP bearings, what is the difference?

A:Cylindrical roller bearing SKF suffix EC means that the internal bearing geometry has a higher bearing capacity after improvement, and the flange and roller end face have good contact and lubrication conditions, which can withstand high axial load. F is steel or special cast iron solid cage P is glass fiber reinforced nylon.

Q5:What kind of bearing is SKF 5207 bearing 5207A-2RS1?

A:Bearing Model: 5207A-2RS1 series: angular contact ball bearings, double row, two-sided seals Inner diameter: 35mm Outer diameter: 72mm Thickness: 27mm Brand: SKF

RS1 — Bearing side with sheel-lined synthetic rubber contact seal.

-2RS1 — Bearing with RS1 seal on both sides.

Q6:Is imported bearing 452309CACM2/W502 the model of SKF? What machine is it used on?

A:It is a SKF bearing type, which belongs to a kind of mining mechanical bearings. Used in mining machinery.

Q7:The bearing type is SKF 6204. Among them, the 6-deep groove ball bearing, the inner diameter D is 20mm.What does 2 mean?

A:6206 = 60204

602 represents the size sequence,2 represents the diameter series; 04 indicates the inner diameter size code

Q8:What does SKF bearing 6200-2RS2/C3GHH mean?

A:Bearing type and rear code description is as follows:

6200: Basic model (deep groove ball bearing, size 10×30×9).

2RS2: Contact seal with fluorinated rubber ring lined with steel plate on both sides (Note: 2RS1 is contact seal with vulcanized rubber ring lined with steel plate on both sides).

/C3: clearance meets the standard of 3 groups, clearance is greater than 0 group.

GHH: G– grease injection (i.e., grease lubrication); H (immediately after G) – high temperature grease, operating temperature range -20 ~ 130℃; H (last bit) — the grease actually used is high temperature oil, and the upper limit of temperature is > 130℃.

Q9:How to convert bearing 3536 into SKF model?

A:3536 is an old model, which is generally used in China or Eastern Europe. It is converted into SKF model or domestic model. The different forms are:

1.08AL stamping retenter:22236CC,22236CC /W33,22236CCK,22236CCKW33(K refers to the conical hole)

SKF form

There are also common forms

2. Copper retaining device: 22236CA, 22236CA/W33, 22236CAK, 22236CAK/W33,

3. Copper two-body reholder: 22236MB, 22236MB/W33, 22236MBK, 22236MBK/W33,

4. Seal 22236-2CS5/VT143 or 22236-2CS5K/VT143 on both sides

The use of various forms of different occasions, different configurations of the use of clearance

Q10:Who knows the main types of SKF bearings in factories around the world?

A:There are too many kinds of classes. Here is a simple answer:

Deep groove ball bearings: France, Italy, China;

Spherical roller bearings: Sweden, the United States, China, Malaysia, the United Kingdom;

Cylindrical roller, cone roller: Germany

Angular contact ball bearing: Austria

High precision bearing: Italy

Pillow Block Bearing: Sweden

Bearing with seat: Italy