NEWS

When the bearing rotates at a high speed and bears a large axial load, the end surface of the nut in contact with the inner ring of the bearing should be perpendicular to the rotation center line of the shaft. Otherwise, even if the nut is tightened, the installation position of the bearing and the normal working condition of the bearing will be destroyed, and the rotation accuracy and service life of the bearing will be reduced. Especially when the fit between the bearing inner hole and the shaft is a loose fit, strict control is needed.

The service life and reliability of rolling bearings are closely related to the metallurgical quality of the bearing steel. Due to the characteristics of bearing steel, the requirements for metallurgical quality are much stricter than those of general industrial steel.

According to the size of the load If the load or impact is large, choose roller bearings (line contact); If the load is small or the impact is small, ball bearings (point contact) should be selected.

The installation of angular contact ball bearings is more complicated than that of deep groove ball bearings. They are mostly installed in pairs and require preloading. Proper installation can greatly improve the working accuracy and bearing life of the host; otherwise, not only the accuracy will not meet the requirements, but the lifespan will also be affected.