- Welcome to YOCH Bearing!
- 0086-531-85866205
- 0086-16653196205
- market@yochibearing.com
YOCH Bearing
06/12/2021
More than 34 years of bearing design and manufacturing years, BONES bearing development so far, is one of the best-selling slide bearing in the United States, the use of unique rubber protection, convenient bearing cleaning, reduce bearing friction, high-speed nylon support to provide greater speed for the bearing.
03/12/2021
There are hundreds of bearings on the car, some can see such as hanger bearings, some can not see, to hear to judge, each has its own law!
03/12/2021
Select suitable bearings according to design requirements. Bearings are d
02/12/2021
Bearing models include pre-code, basic code, and post-code basic code indicates the basic type, structure and size of the bearing.
02/12/2021
Bearing can also be divided into various structural types according to its structural shape (such as whether there is a filling groove, whether there is an inner ring, an outer ring and the shape of the ring, the structure of the retaining edge, and even whether there is a cage, etc.).
01/12/2021
23024C/W33 and 23024CA/W33 should be SKF bearing models. In 23024, 2 is self-aligning roller bearing, 3 represents width, 0 is diameter code, 24 is inner diameter 120MM, C and CA are copper alloy cages, and /W33 represents service temperature limit below 200 degrees.
30/11/2021
Chinese brand bearing Yochi bearing factory, Luoyang Bearing Factory, Hefei Bearing Factory, Harbin Bearing Factory
30/11/2021
Cylindrical roller bearings are commonly used in belt or gear-driven medium to large sized electric motors. The earliest known cylindrical bearings could have been the logs used by ancient civilizations to move large stone structures around.
26/11/2021
Spherical roller bearings typically consist of an inner ring with two raceways inclined at an angle to the bearing axis, an outer ring with a common spherical raceway, spherical rollers, cages and in certain designs also internal guide rings or center rings. The design of these bearings means that they are naturally self-aligning and can handle very heavy radial and axial loads at moderate speeds. The internal design of these bearings is not standardized by ISO, so it varies between different manufacturers and different series.