YOCH Bearing

The installation methods and tools for different types and sizes of imported bearings are also different, including mechanical or hydraulic. Here we mainly explain some common basic installation methods and precautions. First, do not install hard on the ball, which will cause local overload of the ball and contact surface, resulting in premature failure of FAG bearings. Second, do not use hard tools, such as hammers, screwdrivers, etc. to hit the surface of the bearing, which will cause the outer ring of the imported bearing to break or crack.

The installation site should be a certain distance away from lathes, grinders and other mechanical equipment. The site should be cleaned and kept dry and clean at all times to prevent iron filings, sand, dust and moisture from entering the bearings.

Water-lubricated bearings refer to bearings that are used directly in water without any sealing device. The bearings are lubricated by water and do not require lubricating oil or grease, eliminating the harm of water pollution. Bearings are often used in flowing water, which can effectively control the temperature rise of the bearings, so that they have a long service life and are safe and reliable. The structure is suitable for horizontal, vertical and inclined axes.

The end face and inner and outer cylindrical surfaces of the bearing end cover require turning. Semi-finishing and rough turning can be used, and roughing and finishing should be carried out separately to ensure the surface roughness requirements. The main bearing end cover process design is as follows:

Hybrid ceramic bearings may be less common, and the main configuration of hybrid ceramic bearings is composed of inner and outer ring bearing steel/stainless steel + ceramic balls + PA66/stainless steel retainers + 2RS/ZZ. Hybrid ceramic bearings have the following four advantages during use.